Metal Casting Plaster
Materials
- Electronic Paste (토토사이트lm)
-
Engineering Ceramics
- 베팅 사이트 guidance,Thick Film
- Ceramic cores for precision casting
- Porous 스포츠토토사이트 추천mponent
- 토토사이트cuit Substrate
- Gypsum
- Decoration Materials
- 스포츠 토토 List,Metal Casting
- 축구 배팅 사이트 Substrate with Copper
- 축구 배팅 사이트 Financial
- Technical Support
- 베스트 토토사이트 Sustainability
- 스포츠토토 배당률 보기 results
- 토토사이트cuit Substrate with Precious Metal design guidance
- About Our Technology
- New Copper Conductors + Plating Substrate design guidance
- 토토사이트cuit Substrate with Copper Conductors design guidance
- 배팅사이트 순위lm Heater design guidance
- 사설 토토사이트 General
- Pore size control for porous ceramic components
- 스포츠토토 배당률 보기terial Characteristics
- 메이저 토토 사이트RC Characteristics
- Catalog Download
- 토토 사이트 추천 (Baking Kiln and
Demand is growing stronger and stronger for the use of plaster molds in non-ferrous precision metal casting
사용
for metal injection molds
Features
excellent dimensional precision
Lineup
contact us with details on your usage requirements
Plaster for Decorative Use: Gift
-
No shrinkage is exhibited when fired at temperatures of up to 600°
Suitable for rapid heating
C in temperature more than 60 minutes after burying
High heat-shock resistance
Temperatures can be raised suddenly without worrying about mold cracks
Excellent separability
Mold removal is easily accomplished through submersion in water
Low running costs
Rapid heading increases the lifespan of kilns and reduces electrical consumption
Packaging
20kg
참고: Observe the following precautions when using Gift for rapid heating
(1) Curing time after burial: at least 60 minutes
(2) Temperature of kiln: up to 600°
(3) Tree assembly requirements
Tree tip location: at least 20 mm away from the upper surface of flasks
Wax surface area 20 mm: limited to less than 25% of the flask cross-sectional area
Cross-sectional area per item: limited to 4 cm2or less
Non-Foaming Plaster G-2
-
This plaster allows for excellent strong casting with sharp edges and good dimensional and area precision for low-pressure and high-pressure casting
Areas of use
metal injection molds
Applicable metals
Aluminum alloys
Packaging
20kg
Non-Foaming Plaster G-6
-
This plaster allows for excellent strong casting with sharp edges and good dimensional and area precision for low-pressure and high-pressure casting
Areas of use
Metal molds for tires
Applicable metals
Aluminum alloys
Packaging
20kg
Foaming Plaster G-1
-
causing it to foam and allowing the creation of casts that are porous and gas-permeable
Areas of use
heat-insulated feed tubes
Applicable metals
Aluminum alloys
Packaging
20kg
Industrial Lost-wax Casting Plaster: T-6X
-
Plaster casting using the lost-wax method enables complex yet accurate cast products and makes volume production of same-shape items easy
Areas of use
office appliance components and casings
Applicable metals
magnesium alloys
Packaging
20kg
| Category | Product 이름 |
Water-mixing amount (%) |
Stir time (minutes) |
Finish 시간 (minutes) |
Final expansion (%) |
Strength (MPa) | Applications | Features | |
|---|---|---|---|---|---|---|---|---|---|
| Wet tension |
Wet compression |
||||||||
| Foamability | G-1 | 80 | Special Stirring |
30 - 40 | <0.13 | - | - | Making metal molds for tires | Good permeability Good separability Good heat retention |
| Non-foaming | G-2 | 47 - 49 | 6 | 40 - 55 | <0.12 | 0.7 | 3.6 | General-use products | Good dimensional precision Good casting surface smoothness |
| G-6 | 47 - 49 | 4 | 35 - 45 | <0.12 | 0.8 | 3.9 | Making metal molds for tires | Good dimensional precision Good casting surface smoothness |
|
| For lost-wax casting |
T-6X | 36 - 38 | 4 | - | <0.7 | 0.3 | 1.3 | General-use products | Good dimensional precision Good casting surface smoothness Easy removal from mold |
| Gift | 40 | 3 | - | 0.5-0.9 | 0.3 | 2 | Rings and other ornaments Eyeglass components |
Compatible with rapid heating Good dimensional precision Good casting surface smoothness |
|
